Subscribe to our Newsletter
Model No: YeS6PV
YeS6PV series C-class Surge protector device
YeS6PV series C-class Surge protector device is suitable for photovoltaic power generation system. When the system has surge overvoltage due to lightningstrike or other reasons, the protector will immediately turn on in the nanosecond time to introduce the surge overvoltage into the earth. In order to protect theelectrical equipment on the point network.YeS6PV series is a plug-in structure, which can be quickly replaced after the module fails. After the lightning protection module fails, the color of the indicationwindow changes from green to red, and an alarm signal is sent to the remote alarm device connected to the product remote terminal.
Standard:IEC61643-31
Standard:IEC61643-31
Quantity :
YeS6PV Surge Protector Device
General
The YeS6PV series C-class surge protector device is suitable for photovoltaic power generation systems. When the system experiences surge overvoltage due to lightning strikes or other reasons, the protector will immediately activate within nanoseconds to redirect the surge overvoltage to the ground, protecting electrical equipment on the network.
The YeS6PV series has a plug-in structure, allowing for quick replacement after module failure. When the lightning protection module fails, the indication window changes color from green to red, and an alarm signal is sent to the remote alarm device connected to the product's remote terminal.
Standard:IEC61643-31
Operating Conditions
- The ambient air temperature range is between -25°C and +40°C, with relative humidity not exceeding 95%.
- Installation site altitude should not exceed 2000 meters.
- Pollution level: 3
- No explosive atmosphere, and no gas or dust (including conductive dust) in the medium that can corrode metals and damage insulation.
Type Designation
The YeS6PV type designation is structured as follows:
YeS6PV - II 40 2P DC1000
- Model:YeS6PV
- Test category:II
- Maximum discharge current:40kA
- Number of poles: 2P, 3P
- Maximum continuous working voltage: DC500V, DC600V, DC800V, DC1000V, DC1200V, DC1500V
Technical Data
| Parameter | Value |
|---|---|
| Maximum continuous operating voltage | 500V, 600V, 800V, 1000V, 1200V, 1500V |
| Nominal discharging current | 20kA (8/20μS) |
| Maximum discharging current | 40kA (8/20μS) |
| Protection level (In) Up | 2.2kV, 2.5kV, 3.0kV, 3.5kV, 4.0kV, 4.5kV |
| Corresponding time | ≤25ns |
| Range of working temperature | -40°C ~ 70°C |
| Housing material | PA6 UL94 V-O |
| Remote signaling device | Optional, Built-in |
| Protection class | IP20 |
| Work instruction | When the window shows red, the product has failed and needs to be replaced |
| Mounting bracket | 35mm DIN Rail |
| Remote contact point maximum value | 250VAC/0.1A, 125VAC/0.2A, 75VAC/0.5A |
